| Author |
Message |
Rawrorn
|
# Posted: 8 Oct 2007 16:15
Does anyone have a clue how to unlock it or how to reach the hidden pages in another way? I currently get the message: "This feature is not enabled.
This feature has not been enabled in your cable modem."
|
Anonymous
|
# Posted: 30 Oct 2007 09:52
go to
http://192.168.100.1/_aslvl.asp
user: admin
password: W2402
set AccessLevel 2 and enter W2402 as pw again.
|
yoko
|
# Posted: 31 Oct 2007 02:33
why my modem (ECP2203) send IP on my laptop but on my desktop, just syncronizing but no IP :shame:
|
yoko
Member
|
# Posted: 31 Oct 2007 03:01
i forgot to mentioned: desktop work OK on another network (provider), with also DHCP.
the signal is around -9dbmV
|
Joris
Member
|
# Posted: 13 Nov 2007 07:59
This is because you've got the new firmware from your provider, this wil ask you for an username too.
The interface they are describing here is another firmware.
I'm facing the same problem. But if someone could just post all the pages' like : http://192.168.100.1/_aslvl.asp but then all the other pages which will be displayed with userlevel 3. The settings are availeble, look at http://192.168.100.1/gscan.asp ,this is nog realy a user setting.
If you find out, please let it now on this forum
Regrads,
Joris
|
alex
|
# Posted: 13 Nov 2007 14:10
My software version is: epc2203-E10-5-v202r1257-060605
Hardware version: 1.1
There is a page for firmware upgrade which works on my firmware.
URL
The following pages do not work on my router.
URL
URL
URL
I'll be very thankful If someone can post how to get to the emta settings.
Thanks
|
alex
|
# Posted: 13 Nov 2007 14:24
Sorry, here are the pages.
http://192.168.100.1/__swdld.asp
http://192.168.100.1/_
http://192.168.100.1/DprSetup.asp
http://192.168.100.1/DprSetup
|
alex
|
# Posted: 15 Nov 2007 00:34
I'm starting to thing they've changed the password.
A few more pages:
http://192.168.100.1/adv_prod.asp
http://192.168.100.1/_dlcert.asp
http://192.168.100.1/disabled.html
http://192.168.100.1/scie_adv_entry.asp
http://192.168.100.1/techsupport
http://192.168.100.1/techsupport.asp
|
frustrated
|
# Posted: 17 Nov 2007 08:03
Some interesting information in this thread...
Am having same issue and cannot seem to unlock this WebStar modem to allow port forwarding to a 'static' IP address?
If anyone has the answer I would be eternally grateful!
|
Shnerdly
Moderator
|
# Posted: 17 Nov 2007 09:11 - Edited by: Shnerdly
I skimmed through the Users Guide but didn't find too much good information. It does seem that the modem has a built in DHCP server but it doesn't indicate how to access it for port forwarding or any other modifications. On the last page it does give phone numbers for the manufacturer. You might try calling them. You may have better luck on the forum at www.tcniso.net/forum
This modem seems to make a point that I have tried to warn people about for the last few months. When you have your DHCP server and/or router built in to your modem it is under the control of your ISP and in this case it seems that you are without a firewall. It sounds like the ISP is setting paramaters that are good for them but not for you and blocking you from being able to do anything about it.
I very strongly recommend using a modem that is a modem only and using a separate router/firewall. All of the Motorola SB5100 series modems are an excellent choice.
|
me
|
# Posted: 19 Jan 2008 16:47
I have a 2203 and this unlocking works. i get the site with Ethernet and Accesslevel1 ... username and password input fields.
it only works if i only input the Passwort, leave the username in the webform empty! .
is there a config site ?
Anyone have realised to change the config ? 
|
Anonymous
|
# Posted: 20 Mar 2008 15:20
Many of these liks doesn't work on the actual firmware (v202r1262-071105-sip). Have you managed what are the links now?
There works setting the accesslevel but most of these links don't work.
|
Shnerdly
Moderator
|
# Posted: 20 Mar 2008 22:44
If you go to the home page in the modem, you should be able to navigate to what ever it is your looking for.
http://192.168.100.1
I don't run this modem so I'm afraid I can't be of more assistance.
|
Anonymous
|
# Posted: 21 Mar 2008 17:04
@Shnerdly,
there are many hidden pages without links from home page of the modem I would like to see. For example I'd like to try to enable VoIP from one of the supported networks - the modem supports it, but it's disabled by my cable provider at boot time when the configuration is loaded from provider dhcp+tftp servers and there is no option to change anything at the navigation from the home page.
|
Shnerdly
Moderator
|
# Posted: 21 Mar 2008 17:28
OK.
There are many VoIP providers that don't require any setup in the modem such as Packet8 and Vonage. The VoIP setup in the modem would probably only be for using your ISP's VoIP system.
|
Anonymous
|
# Posted: 5 Apr 2008 22:29
I found a glitch in the firmware of the DPC 2100 series modems. I found if you set your network adapter's MAC Address to the same MAC address as the modem, it will kill the connection to the modem.
This could possibly be exploited by setting remote routers' MAC addresses to match the modems of users within a certain ISP's IP range. In effect, it could be possible to cut large amounts cable users internet access.
|
Shnerdly
Moderator
|
# Posted: 7 Apr 2008 08:01
What you have actually found is that the MAC address has to be unique. If multiple houses had the exact same address how would anyone be able to find a specific one. When you clone the MAC of the modem you create a conflict on the network. The modem can't send the data to you because it would also have to send it to itself and it can't. It's not a "glitch", it's simply how MAC addresses work.
|
Anonymous
|
# Posted: 23 Apr 2008 15:34
I need help...
First i went to [url=192.168.100.1][/url] then i logged in as ADMIN and password for W2402 and all i see is SET ACCES LEVEL and PASSWORD... I put acces level 2 and put W2402 as password and when it goes, it goes to the same page...
|
Anonymous
|
# Posted: 4 May 2008 07:29
I have a DPC2100R2 and the access level thing worked, at first I was copy pasting the password and it wasnt working then I type it in(W2402) and voila!!
Thanks Guys! 
|
Shnerdly
Moderator
|
# Posted: 4 May 2008 16:26
"at first I was copy pasting the password and it wasn't working then I type it in(W2402) and voila!! "
Thats a good piece of info.
Thanks for the post.
|
Anonymous
|
# Posted: 4 Jun 2008 15:51
i would like to port forward this scientific atlanta 2203c to get my online games to go through so others can connect without having connection problems; that is what port forwarding is for.
I think they did change the password or maybe have to reset the box and enter the info once more. On my other westell that is what I had to do to get to the easily configured interface--hopefully this one is as easy or easier.
|
Anonymous
|
# Posted: 4 Jun 2008 18:11
just called the tech rep at time-warner and he said that the modems are all ports open. I checked my trackmania game and it ran without a nat warning. So the 2203c has full ports open and you cannot run static ip address anymore without additional price same goes for personal web server.
|
Anonymous
|
# Posted: 4 Jun 2008 19:07
called the rep number on the box 611 just to give it another try since i don't want all ports open on the computer while playing online games just the ports that NEED to be open; did not win with the rep here either and would not provide a default username and password in the advanced section of the modem page.
|
Shnerdly
Moderator
|
# Posted: 5 Jun 2008 07:40 - Edited by: Shnerdly
This modem is just a modem with a DHCP server built in. Some models have a built in VoIP connection but none would have firewall capabilities which is what your looking for.
To block ports, you should get a router such as the Linksys WRT54G which will add wifi to your location or the Linksys BEFSR41 which is a basic router firewall.
|
Rahvasaadik
|
# Posted: 10 Jul 2008 12:24
the password w2402 has been changed, probably by my ISP. Is it possible to crack it, say with Cain?
|
Shnerdly
Moderator
|
# Posted: 10 Jul 2008 14:50 - Edited by: Shnerdly
Rahvasaadik
I see in your post that you have the password as w2402 instead of W2402.
I don't have this modem to try it but passwords are almost always case sensative.
Also note that the username may also be case sensitive if the device is using a linux variant for an operating system.
|
Treser
|
# Posted: 10 Jul 2008 22:04
is it not possible simply to reset for at least 10 seconds the modem and then get in the standard settings with settable ip adresses?
My modem here in Belgium doesn't even give more than the one first page with the following info.
System
The data shown in the table below provides information about the system of your cable modem.
Name
SA EPC2203
Hardware Version
1.1
Receive Power Level
3.7 dBmV
Transmit Power Level
34.2 dBmV
Cable Modem Status
Operational
Vendor
Scientific Atlanta - A Cisco Company
Boot Revision
2.1.6lR6
Software File Name and Revisions
The data shown in the table below provides information about the firmware of your cable modem.
Firmware Name
epc2203-E10-13-v202r1262-071203cs.bin
Software Revision
epc2203-E10-13-v202r1262-071203cs
The other pages give all This feature is not enabled.
This feature has not been enabled in your cable modem.
Please contact your data services provider for more information about this feature and its availability on the network.
To exit this page, click on the "Back" button on your browser tool bar to return to the previous page or click on the "System" link above.
And there is on login possibility
Anyone a idee or the 10 second reset option does the trick?
|
Rahvasaadik
|
# Posted: 11 Jul 2008 04:22
Neither passwords work, w2402 nor W2402. I'm telling you, someone has been messing with my modem. Any ways to crack this?
|
helpdeskguy
|
# Posted: 11 Jul 2008 10:42
does it work like a router? if you reboot with the small button on the modem does it return to factory setting? try pressing the reboot button and then typing the W2402 password
|
Frans
|
# Posted: 13 Jul 2008 09:00
I have tried logging in to my EPC2203, but the password (W2402) is not correct..... please help.
|
